-
Hot-selling Kh2po4 - LiNbO3 Crystal – WISOPTIC
LiNbO3 (Lithium Niobate) crystal is a multifunctional material that integrates properties of piezoelectric, ferroelectric, pyroelectric, nonlinear, electro-optical, photoelastic, etc. LiNbO3 has good thermal stability and chemical stability. As one of the most thoroughly characterized nonlinear optical materials, LiNbO3 is suitable for a variety of frequency conversion applications. For example, it is widely used as frequency doublers for wavelength >1 μm and optical parametric oscillators... -
Excellent quality Lens - CERAMIC REFLECTOR – WISOPTIC
The ceramic reflector (ceramic cavity) is made from 99% Al2O3, and the body is fired at suitable temperature to retain appropriate porosity and high strength. The surface of the reflector is fully coated with high-reflectivity ceramic glaze. Compared with the gold-plated reflector, ceramic reflector has main advantages of extremely long service life and high diffuse reflectivity. WISOPTIC Specifications – Ceramic Reflector Material Al2O3 (99%)+ Ceramic glaze Color White Density ... -
Factory wholesale Linbo3 Q-Switch - BBO POCKELS CELL – WISOPTIC
BBO（Beta-Barium Borate, β-BaB2O4）based Pockels cells operate from approximately 0.2 – 1.65 µm and are not subject to tracking degradation. BBO exhibits low piezoelectric response, good thermal stability, and low absorption. Due to the low piezoelectric coupling coefficients of BBO, BBO Pockels cells function at repetition rates of hundreds of kilohertz. These Pockels cells work in regenerative amplifiers, high pulse repetition rate micro-machining lasers and high-average power lasers ... -
OEM/ODM China Kd*P Q-Switch - BBO POCKELS CELL – WISOPTIC
BBO（Beta-Barium Borate, β-BaB2O4）based Pockels cells operate from approximately 0.2 – 1.65 µm and are not subject to tracking degradation. BBO exhibits low piezoelectric response, good thermal stability, and low absorption. Due to the low piezoelectric coupling coefficients of BBO, BBO Pockels cells function at repetition rates of hundreds of kilohertz. These Pockels cells work in regenerative amplifiers, high pulse repetition rate micro-machining lasers and high-average power lasers ... -
-
Factory source Filters - WINDOW – WISOPTIC
Optical windows are made by optically flat, transparent optical material that allow light into an instrument. Windows have high optical transmission with little distortion of the transmitted signal, but can not change the magnification of the system. Windows are widely used in various optical devices such as spectroscopic equipment, optoelectronics, microwave technology, diffractive optics, etc. When choosing a window, the user should consider whether the material’s transmission propert... -
Hot New Products Kd2po4 - BBO Crystal – WISOPTIC
BBO (ẞ-BaB2O4) is an excellent nonlinear crystal with combination of a number of unique features: wide transparency region, broad phase-matching range, large nonlinear coefficient, high damage threshold, and excellent optical homogeneity. Therefore, BBO provides an attractive solution for various nonlinear optical applications such as OPA, OPCPA, OPO etc. BBO also has advantages of large thermal acceptance bandwidth, high damage threshold and small absorption, thus is very suitable for freque... -
High Quality Functional Crystals - KDP & DKDP Crystal – WISOPTIC
KDP (KH2PO4 ) and DKDP/KD*P (KD2PO4 ) are among the most widely-used commercial NLO materials. With good UV transmission, high damage threshold, and high birefringence, these material are usually used for doubling, tripling and quadrupling of Nd:YAG laser. With high E-O coefficient, KDP and DKDP crystals are also widely used to make Pockels cells for laser system, such as Nd:YAG, Nd:YLF, Ti-Sapphire, Alexandrite, etc. Even though DKDP with high deuteration is more commonly used, KDP and DKDP ... -
High Performance High Deuteration Dkdp - Nd:YVO4 Crystal – WISOPTIC
Nd:YVO4 (Neodymium-doped Yttrium Vanadate) is one of the best commercially available material for diode-pumped solid-state lasers, especially for lasers with low or middle power density. For example, Nd:YVO4 is a better choice than Nd:YAG for generating low-power beams in hand-held pointers or other compact lasers. In these applications, Nd:YOV4 has some advantages over Nd:YAG, e.g. high absorption of pumped laser irradiation and large stimulated emission cross section. Nd:YVO4 is a good choi... -
-
Hot Selling for Kd*P Crystal - LiNbO3 Crystal – WISOPTIC
LiNbO3 (Lithium Niobate) crystal is a multifunctional material that integrates properties of piezoelectric, ferroelectric, pyroelectric, nonlinear, electro-optical, photoelastic, etc. LiNbO3 has good thermal stability and chemical stability. As one of the most thoroughly characterized nonlinear optical materials, LiNbO3 is suitable for a variety of frequency conversion applications. For example, it is widely used as frequency doublers for wavelength >1 μm and optical parametric oscillators... -
PriceList for Lithium Niobate - KTA Crystal – WISOPTIC
KTA (Potassium Titanyle Arsenate, KTiOAsO4 ) is a nonlinear optical crystal similar to KTP in which atom P is replaced by As. It has good non-linear optical and electro-optical properties, e.g. significantly reduced absorption in band range of 2.0-5.0 µm, broad angular and temperature bandwidth, low dielectric constants. Compared with KTP, the main advantages of KTA include: higher second-order nonlinear coefficient, longer IR cut-off wavelength, and less absorption at 3.5 µm. KTA also has lo...
