Products

Featured

  • Factory Cheap Hot Hgtr-Ktp - LiNbO3 / PPLN Crystal – WISOPTIC

    Factory Cheap Hot Hgtr-Ktp - LiNbO3 / PPLN Crystal – WISOPTIC

    LiNbO3 (Lithium Niobate) crystal is a multifunctional material that integrates properties of piezoelectric, ferroelectric, pyroelectric, nonlinear, electro-optical, photoelastic, etc. LiNbO3 has good thermal stability and chemical stability. As one of the most thoroughly characterized nonlinear optical materials, LiNbO3 is suitable for a variety of frequency conversion applications. For example, it is widely used as frequency doublers for wavelength >1 μm and optical parametric oscillators...
  • Low price for Kta - KDP & DKDP Crystal  – WISOPTIC

    Low price for Kta - KDP & DKDP Crystal – WISOPTIC

    KDP (KH2PO4 ) and DKDP/KD*P (KD2PO4 ) are among the most widely-used commercial NLO materials. With good UV transmission, high damage threshold, and high birefringence, these material are usually used for doubling, tripling and quadrupling of Nd:YAG laser. With high E-O coefficient, KDP and DKDP crystals are also widely used to make Pockels cells for laser system, such as Nd:YAG, Nd:YLF, Ti-Sapphire, Alexandrite, etc. Even though DKDP with high deuteration is more commonly used, KDP and DKDP ...
  • 2019 China New Design Linbo3 Pockels Cell - BBO POCKELS CELL – WISOPTIC

    2019 China New Design Linbo3 Pockels Cell - BBO POCKELS CELL – WISOPTIC

    BBO(Beta-Barium Borate, β-BaB2O4)based Pockels cells operate from approximately 0.2 – 1.65 µm and are not subject to tracking degradation. BBO exhibits low piezoelectric response, good thermal stability, and low absorption. Due to the low piezoelectric coupling coefficients of BBO, BBO Pockels cells function at repetition rates of hundreds of kilohertz. These Pockels cells work in regenerative amplifiers, high pulse repetition rate micro-machining lasers and high-average power lasers ...
  • Factory wholesale Electro-Optic Modulator – DKDP POCKELS CELL – WISOPTIC

    Factory wholesale Electro-Optic Modulator – DKDP POCKELS CELL – WISOPTIC

    Because DKDP crystals are prone to deliquescent and have poor mechanical properties, DKDP Pockels cell with excellent performance have extremely high requirements for the selection of DKDP material, crystal processing quality and switch assembling technique. The high performance DKDP Pockels cell developed by WISOPTIC have been widely used in high-en cosmetic and medical lasers produced by some distinguished companies in China, Korea, Europe and USA. WISOPTIC has been granted of several paten...
  • High reputation Pockels Cell Modulator - RTP POCKELS CELL – WISOPTIC
  • Best Price for Baf2 - LiNbO3 / PPLN Crystal – WISOPTIC

    Best Price for Baf2 - LiNbO3 / PPLN Crystal – WISOPTIC

    LiNbO3 (Lithium Niobate) crystal is a multifunctional material that integrates properties of piezoelectric, ferroelectric, pyroelectric, nonlinear, electro-optical, photoelastic, etc. LiNbO3 has good thermal stability and chemical stability. As one of the most thoroughly characterized nonlinear optical materials, LiNbO3 is suitable for a variety of frequency conversion applications. For example, it is widely used as frequency doublers for wavelength >1 μm and optical parametric oscillators...
  • Manufactur standard Tgg - Nd:YVO4 Crystal – WISOPTIC

    Manufactur standard Tgg - Nd:YVO4 Crystal – WISOPTIC

    Nd:YVO4 (Neodymium-doped Yttrium Vanadate) is one of the best commercially available material for diode-pumped solid-state lasers, especially for lasers with low or middle power density. For example, Nd:YVO4 is a better choice than Nd:YAG for generating low-power beams in hand-held pointers or other compact lasers. In these applications, Nd:YOV4 has some advantages over Nd:YAG, e.g. high absorption of pumped laser irradiation and large stimulated emission cross section. Nd:YVO4 is a good choi...
  • China wholesale Precision Optics - WINDOW – WISOPTIC

    China wholesale Precision Optics - WINDOW – WISOPTIC

    Optical windows are made by optically flat, transparent optical material that allow light into an instrument. Windows have high optical transmission with little distortion of the transmitted signal, but can not change the magnification of the system. Windows are widely used in various optical devices such as spectroscopic equipment, optoelectronics, microwave technology, diffractive optics, etc. When choosing a window, the user should consider whether the material’s transmission propert...
  • Manufacturing Companies for Ceramic Reflector - WAVE PLATE – WISOPTIC

    Manufacturing Companies for Ceramic Reflector - WAVE PLATE – WISOPTIC

    A wave plate, also called a phase retarder, is an optical device that changes the polarization state of light by generating an optical path difference (or phase difference) between two mutually orthogonal polarization components. When the incident light passes through wave plates with different types of parameter, the exit light is different, which may be linearly polarized light, elliptically polarized light, circularly polarized light, etc. At any particular wavelength, the phase difference...
  • High Quality Laser Optics - CERAMIC REFLECTOR – WISOPTIC

    High Quality Laser Optics - CERAMIC REFLECTOR – WISOPTIC

    The ceramic reflector (ceramic cavity) is made from 99% Al2O3, and the body is fired at suitable temperature to retain appropriate porosity and high strength. The surface of the reflector is fully coated with high-reflectivity ceramic glaze. Compared with the gold-plated reflector, ceramic reflector has main advantages of extremely long service life and high diffuse reflectivity.  WISOPTIC Specifications – Ceramic Reflector Material Al2O3 (99%)+ Ceramic glaze Color White Density ...
  • OEM Manufacturer Er:Yag - Bonded Crystal – WISOPTIC

    OEM Manufacturer Er:Yag - Bonded Crystal – WISOPTIC

    Diffusion bonded crystal consists of two, three or more parts of crystals with different dopants or same dopant with different doping levels. This material is commonly made by bonding one laser crystal with one or two undoped crystals by precise optical contact and further processing under high temperature. This innovative design substantially reduces thermal lens effect of the laser crystals, thus make it possible fora compact laser to have enough power. Contact us for the best solution for ...
  • OEM/ODM Factory Glan-Laser Polarizer - WAVE PLATE – WISOPTIC

    OEM/ODM Factory Glan-Laser Polarizer - WAVE PLATE – WISOPTIC

    A wave plate, also called a phase retarder, is an optical device that changes the polarization state of light by generating an optical path difference (or phase difference) between two mutually orthogonal polarization components. When the incident light passes through wave plates with different types of parameter, the exit light is different, which may be linearly polarized light, elliptically polarized light, circularly polarized light, etc. At any particular wavelength, the phase difference...