Chinese wholesale Kd*P - KTA Crystal – WISOPTIC
Chinese wholesale Kd*P - KTA Crystal – WISOPTIC Detail:
KTA (Potassium Titanyle Arsenate, KTiOAsO4 ) is a nonlinear optical crystal similar to KTP in which atom P is replaced by As. It has good non-linear optical and electro-optical properties, e.g. significantly reduced absorption in band range of 2.0-5.0 µm, broad angular and temperature bandwidth, low dielectric constants.
Compared with KTP, the main advantages of KTA include: higher second-order nonlinear coefficient, longer IR cut-off wavelength, and less absorption at 3.5 µm. KTA also has lower ionic conductivity than that of KTP, which results in a higher laser induced damage threshold.
KTA is very popularly used for Optical Parametric Oscillation (OPO) application which gives high energy conversion efficiency (above 50%) of tunable laser radiation in solid lasers.
Contact us for the best solution for your application of KTA crystals.
WISOPTIC Advantages - KTA
• High homogeneity, excellent internal quality
• Top quality of surface polishing
• Large block for various size (e.g. 10x10x30mm3, 5x5x35mm3)
• Large nonlinear coefficient, high conversion efficiency
• Broad transparency range, large temperature matching width
• AR coatings for wave range from visual light to 3300 nm
• Very competitive price, quick delivery
WISOPTIC Standard Specifications* - KTA
| Dimension Tolerance | ± 0.1 mm |
| Cutting Angle Tolerance | < ± 0.25° |
| Flatness | < λ/8 @ 632.8 nm |
| Surface Quality | < 10/5 [S/D] |
| Parallelism | < 20” |
| Perpendicularity | ≤ 5′ |
| Chamfer | ≤ 0.2mm @ 45° |
| Transmitted Wavefront Distortion | < λ/8 @ 632.8 nm |
| Clear Aperture | > 90% central area |
| Coating | AR@1064nm(R<0.2%) & 1533nm(R<0.5%) & 3475nm(R<9%) or upon request |
| Laser Damage Threshold | 500 MW/cm2 for 1064nm, 10ns, 10Hz (AR-coated) |
| * Products with special requirement upon request. | |
Main Features - KTA
• High nonlinear coefficient, high electro-optical coefficient
• Wide acceptance angle, small wall-off angle
• Broad transparency range, large temperature matching width
• Small dielectric constant, low ionic conductivity
• Lower absorption in 3-4 µm spectrum range than that of KTP
• High laser damage threshold
Primary Applications – KTA
• OPO for mid IR generation – up to 4 µm
• Sum and Difference Frequency Generation in mid IR range
• Electro-optical modulation and Q-switching
• Frequency doubling (SHG @1083nm-3789nm).
Physical Properties – KTA
| Chemical formula | KTiOAsO4 |
| Crystal structure | Orthorhombic |
| Point group | mm2 |
| Space group | Pna21 |
| Lattice constants | a=13.103 Å, b=6.558 Å, c=10.746 Å |
| Density | 3.454 g/cm3 |
| Melting point | 1130 °C |
| Curie temperature | 881 °C |
| Mohs hardness | 5 |
| Thermal conductivity | k1=1.8 W/(m·K), k2=1.9 W/(m·K), k3=2.1 W/(m·K) |
| Hygroscopicity | non-hygroscopic |
Optical Properties- KTA
| Transparency region (at “0” transmittance level) |
350-5300 nm | ||
| Refractive indices (@632.8 nm) | nx | ny | nz |
| 1.8083 | 1.8142 | 1.9048 | |
| Linear absorption coefficients (@532 nm) |
α = 0.005/cm | ||
|
NLO coefficients (@1064 nm) |
d15=2.3 pm/V, d24=3.64 pm/V, d31=2.5 pm/V, d32=4.2 pm/V, d33=16.2 pm/V |
||
|
Electro-optic coefficients |
r13 |
r23 |
r33 |
| 11.5 ± 1.2 pm/V | 15.4 ± 1.5 pm/V | 37.5 ± 3.8 pm/V | |
Product detail pictures:
Related Product Guide:
With dependable high quality approach, great reputation and excellent customer support, the series of products and solutions produced by our firm are exported to lots of countries and regions for Chinese wholesale Kd*P - KTA Crystal – WISOPTIC, The product will supply to all over the world, such as: Algeria, Australia, Hamburg, Aiming to grow to be by far the most professional supplier within this sector in Uganda, we keep researching on the creating procedure and raising the high quality of our principal goods. Till now, the merchandise list has been updated on a regular basis and attracted customers from around the globe. Detailed data can be obtained in our web page and you'll be served with good quality consultant service by our after-sale team. They're going to allow you to get complete acknowledge about our items and make a satisfied negotiation. Small business check out to our factory in Uganda can also be welcome at any time. Hope to obtain your inquiries to get a happy co-operation.
By Constance from Cannes - 2017.10.13 10:47
We have been engaged in this industry for many years, we appreciate the work attitude and production capacity of the company, this is a reputable and professional manufacturer.
By Gary from South Korea - 2018.06.09 12:42
